News center

Simple structure and low purchase cost; It is almost unnecessary to replace filter consumables and rely on water circulation to intercept paint mist; Good indoor cooling effect, suitable for high temperature workshop oil paint spraying.

1. Enclosed dedusting chamber Anti-static insulation room, access door and observation port; The chamber maintains a slight negative pressure and the dust will not float out.

PP, PE, HDPE and other non-polar plastics have strong surface inertness. Direct spraying of UV paint is very easy to paint off, shrinkage cavity and poor adhesion. LPG+compressed air mixed combustion, 1100 〜 1800 ℃ high temperature flame scanning workpiece surface instantaneously:

Automatic spraying room=closed dust-free spraying chamber+automatic spraying mechanism+negative pressure paint mist collection, air supply purification, PLC electronic control system, without manual holding spray gun;

Supply air from top to bottom in the room and spray UV coating with spray gun; Paint is attached to the workpiece surface, and excessive suspended paint mist is sucked into the paint mist recovery host by negative pressure at the bottom;

UV curing equipment relies on * * UV light energy * * to activate the photoinitiator in UV glue, ink, three-proofing paint and varnish