4News -> Company dynamics
1. Enclosed dedusting chamber
Anti-static insulation room, access door and observation port; The chamber maintains a slight negative pressure and the dust will not float out.
2. Top clean air supply system
Primary effect+medium effect filtration, clean air vertically blowing down, suspended dust in the control room.
3. Core dust removal assembly (standard for UV plastic spraying)
Ion air bar/rotating ion air nozzle * * neutralize the static electricity of plastic and remove the electrostatic adsorption dust; Reciprocating multi-directional blowing, complex shell, groove and inside dead corner can be cleaned.
Fixed ion air gun and reciprocating ion purging mechanism
Optional: rotary dust removal brush, roller brush dust removal (plate, flat part)
4. Bottom/Side Negative Suction System
Dust inlet - pipe - centrifugal fan - dust filter box; The blown dust shall be immediately pumped out of the dedusting bin to prevent the dust from falling to the workpiece again.
5. Conveying mechanism
Chain conveying line and rotating tooling, the workpiece can rotate automatically to realize 360 ° all-around purging and dust removal.
6. Induction and electrical control
Photoelectric sensor workpiece induction, PLC linkage, workpiece arrival automatically start ion air and dust collection; Synchronous start and stop with the speed of the whole assembly line.
