News center

4News -> FAQ

Location: Home -> News -> FAQ -> Basic hardware structure of linear oven

Furnace shell and insulation interlayer
Thermal insulation aluminum silicate wool, insulation layer thickness of 80-100mm, temperature locking, power saving, no hot hands on the shell; Sectional splicing assembly, lengthening furnace body according to production capacity.

Multi-section independent temperature control zone (PID temperature control)
Generally, it is divided into volatilization zone, solidification zone and insulation zone, and the temperature of each section is independently adjustable, and the temperature error is within ± 2 ℃.

Hot air circulation system
Circulating fan, air duct and hot air circulation in the furnace shall be free of dead corner, so as to prevent uneven baking of upper and lower parts and inner wall of the workpiece (suitable for baking of pipe fittings after spraying of inner hole).

Heat insulation air curtain at air inlet and outlet
It can prevent hot gas from flowing out and external dust from entering the furnace, and the paint surface is not prone to dust spot defects.

Types of heating sources
-Electric heating: small plastic and glass bottle painting line, clean and convenient
-Natural gas/liquefied gas heating: large hardware spraying production line, lower energy consumption
-IR heating: low-temperature plastic parts, UV primer pre-baking

Conveying mechanism
Hanging chain, ground rail conveying and roller conveying; Suitable for suspension line delivery hardware, bottle glass, blower housing.

Cooling discharge section: forced cooling with clean air at normal temperature. Blanking after cooling workpiece after baking

[Back]

Prev:Complete Process Flow: Linear Oven + UV Curing Line

Next:Advantages and Disadvantages of Vacuum Coating Machine